Non-sparking screwdrivers and hex keys

Non-sparking screwdrivers and hex keys, for use in Ex-zones 1 and 2. The Non-sparking tools are made of special alloys based on copper and bronze that do not form flammable sparks when you strike or rub the tool. The tools have been used all over the world since 1992.

Technical information

Non-sparking hand tools made in Germany. All the hand tools that Safety Tools Allmet offers are BAM-certified.

This certificate ensures that the materials we make our tools of are applicable in explosion-endangered zone 1 / 21 according to the European guideline 199/92/EG for all explosion groups defined under IEC 60079:2004 section 0. The scope of explosion-endangered zones was changed from Zone 0 / 20 to zone 1 / 21 according to TRBS 2152 section 3 attachment sentence (2).

Explosion prevention ATEX = ATmosphere Explosible

ATEX 137 (118), also called guideline 99/2/EG, is responsible for the safety of persons at commissioning, operation, and attendance of explosive plants.
Corresponding ATEX 99/92/EC Endres Tools are to be used in Ex-Zones.
Since July 2003, only operating material, which conforms to this guideline, is allowed to be placed into circulation.

APPLICATION ADVICE

Because of its application methods, non-sparking tools have to be softer than conventional tools. For this reason, the use of these tools has to be used with special care. Overstraining has to be avoided.

The use of non-sparking tools must not be the only preventive measurement in areas of fire and explosion risk.
For overall protection of staff and equipping, please follow the instructions of your professional association.[/vc_column_text]

Analysis of non-sparking material

Material

Specialbronze SB „S“ Aluminium-multi-substance-bronze         

Copper-Beryllium CuBe „C“

Analysis

Cu

Al

Ni

Fe

Mn

Be

Ni

Co

Cu

min. in %

Rest

8

4

4

1,8

0,1

0,4

Rest

max. in %

Rest

10,5

6

5,5

1,33

2,3

0,5

0,7

Rest

Mechanical properties

cured

untreated

Strength N/mm2

780-989

600-670

1117-1326

Yield point N/mm2

450-550

250-270

840-880

Hardness

230-290

140-180

280-365

Physical properties

Magnetic properties

1,35 max.

1,005 max.

Detailed user guideline