Specially made ATEX certified air machine of Japanese quality, exclusively for Safety Tools Allmet.
“A-0105-Cutting” is the air tool marked with the ATEX number for cutting.
ATEX marking on the air tool
EX II 2G Ex h IIA T4 Gb (GAS)
EX II 2D Ex h IIIC T103°C Db (Dust)
ATEX Certifications can be found here
Separate ATEX certificates for GRINDING and Cutting.
The air tool is included in our package solutions for cutting tools.
More information about our cutting solutions/kits.
If you wish to purchase additional air tools for your package solution, the following is required per air tool:
Cutting disc (5mm) + Air tool:
Air tool for cutting
A-0502 – Cutting disc
A-0073 – Cutting guard
A-0077A – Inside adapter chuck
A-0077C – Outside adapter chuck
A-0079 – Nozzle with connector
Weld removal disc (10mm) + Air tool:
Air tool for cutting
A-0503 – Weld removal disc
A-0074 – Weld removal guard
A-0079 – Nozzle with connector
Extra accessories:
Recommended helping hand tools:
A-0420 Cutting Guide Compact
A-0410 – Pendulum Arm
A-0320 – Cutting Guide Jr
Technical details for A-0105-Grinder
- Speed – 1000 rpm
- Weight – 2400g
- Length – 377mm
- Diameter – 50mm
- Max Air Cons – 0,50 m3/min
- Temperature Marking – T3/T4
- Air inlet – 1/4″ NPT
- Pneumatic tool drawing
- User manual
Recommended Usage Areas
Our cold technology is used in many sectors, including oil and gas, petrochemical, steel construction, and shipbuilding. In addition to maintenance work on bridges and offshore installations.
Below you can find our project pages.
Cold Solutions - ATEX Certified
Health, Safety & the Environment
Products comply with Health Safety & the Environment (HSE & OSHA) requirements, offering low vibration, heat, and noise levels. The fragments are large and blunt and will stay within a few centimetres/inches of your work area, thus making cleaning up simple and safe.
Certified and classified by Gexcon Certification
All solutions from Safety Tools Allmet are ATEX Certified as safe to use in ATEX Gas zones 1 & 2. Our cutting tools are also certified for use in ATEX dust zones 21 & 22. No need for a hot work permit, habitats, fire guards, shutdowns and nitrogen flushing/flushing.
Tungsten Carbide
Our rotating files and discs consist of solid tungsten carbide. The hardness and design of the teeth significantly increase the lifetime of the grinding files and discs. You can expect a lifetime of 100 times more than conventional burrs.
Spot Repair
Ex-certified cold work tools from Safety Tools Allmet provide a good, clean surface with a profile that meets the requirements of the SSPC-SP11 Surface Preparation Standard.
Surface profile
The solid tungsten head for Safety Tools cold rotating grinding files has different designs on its teeth so that they can produce different surface profiles for every situation. Our burrs create a roughness profile of between 40 – 75 microns.
Adhesion and Cleanliness
The correct surface profile creates a suitable anchor for paint and coatings. ATEX grinding tools from Safety Tools Allmet create good adhesion and a clean surface. Extensively independently tested for surface adhesion by International Paint, Jotun, Chevron and Weatherford.
NO Isocyanates - LOW Sound levels - LOW Vibration
NO release of isocyanates when grinding or cutting through polyurethane.
Low sound level. (<85 dB)
Low vibration. (Average <2.5 m/s)
Safety Tools Allmet - Since 1998
We are experts in training, usage and maintenance of our cold solutions. We can document years worth of good feedback from customers worldwide.
